Products

Please use the links at the bottom left to browse through our large selection of products.

About Our Products...

Threaded End - 1 & 2 Piece Body Design:

General purpose ball valves commonly used in smaller sized pipelines under three inch in size.  These valves tend to be used in more permanent applications where maintenance is seldom required.

Threaded End - 3 Piece Body Design:

Three piece body valves area multi-purpose ball valves.  They tend to be used in more demanding applications where maintenance will be required on a more frequent basis than 2 piece valves.  The 3 piece body's center section can be removed to allow the valve end caps to be welded without the possibility of damaging the valve seats.  Any combination of end connections can be supplied to meet your custom requirements.\

Flanged End - 1 & 2 Piece Body Designs:

A conventional design ball valve, made to be easily installed or removed from the pipeline.  It is one of a few ball valves where its end-to-end or face-to-face dimensions is controlled by ANSI.  Most all manufacturers conform to ANSI Guidelines.

Multi-Port Ball Valves:

Multi-Port Ball Valves will lower overall cost by allowing the replacement of two or three conventional straight line valves, thus eliminating or reducing pipe fitting and expensive automation equipment.